Swann PRO-751 Anleitung zur Fehlerbehebung

PRO-751 DomeM751CAM200812EEnglish

10NOTE: Before you begin, be sure that there are no live electrical cables in the area you wish to mount the camera.To mount the camera:After connecti

11Field of viewThe PRO-751 can pan a full 360º. This means that (for example) installing the PRO-751 in a tight corner is probably not an ideal utiliz

12The included PTZ controller is capable of controlling multiple PTZ cameras. Thus, each camera needs its own unique identification (a “Command Address

13Connecting multiple PTZ systems to the included controller is a convenient way to be able to access and control a complex, multi-camera system from

14Moving the CameraThe easiest way to move the camera is to use the directional buttons. In the standard live control mode, the camera will move in th

15Removing a Preset PointRemoving Preset Points is performed in much the same manner as defining them. Once a Preset Point has been removed, selecting

16The numerical command functions shown in this section are recommended only for advanced users. Improper use of these commands may interfere with the

17Auto-Home FunctionThe PRO-751 can be configured to automatically return to it’s master Preset Point, the “Home Point”. This is particularly useful fo

18Problem: My DVR is in Motion Detection mode, and continually records whilst the camera is moving.Solution: This is not a malfunction. When a DVR loo

19VideoImage Sensor 1/3” CCDVideo Quality 700 TV LinesNumber of Effective Pixels NTSC: 976 x 494 PAL: 976 x 582Minimum Illumination

2FCC Verification:NOTE: This equipment has been tested and found to comply with the limits for Class B digital device, pursuant to part 15 of the FCC R

© Swann Communications 2012Advanced security made easy™Warranty InformationHelpdesk / Technical Support DetailsSwann Technical SupportAll Countries E-

3Before you Begin 2Table of Contents 3Quick Reference 3Overview 4Package Contents 4Layout of the Camera and PTZ Control

4Congratulations on your purchase of this 360º PTZ Camera Dome! This system is an ideal solution for monitoring a large area – a combination of a high

51. Wall-Mount ArmFor mounting the PRO-751 Dome to a wall, post or similar vertical surface.2. Ceiling-mount BracketFor mounting the PRO-751 Dome to t

6DISP (Display)Toggles the display on the front of the PTZ Controller, showing the Command Address, Protocol and Baud Rate.PRESET (HOLD to define)Chang

7ZOOM + / -: Increases and decreases the level of magnification, respectively. The PRO-751 features a 3x optical zoom.FOCUS + / - andIRIS OPEN / CLOSE

81257431. After running the camera cable through the mounting arm/bracket, attach to the main plug on the camera circuit board (see opposite).2. Con

91. Connecting the Camera CableBefore mounting the camera, it is important to connect it correctly.1. Run the cable through the mounting arm or brack