The camera features an omni-directional antenna which is most effective when
use in the UPRIGHT position.
1) Connect the receiver to its respective power adaptor.
2) Connect the Video Output Socket (1) on the receiver to the equipment you
wish to view the camera on (monitor, AV TV, VCR, DVR etc) using the
supplied Video Signal Cable.
NOTE: This camera doesn’t have Audio.
3) If you have an A/V TV with RCA sockets you will need to switch the TV to the
AV channel to view the camera.
To view the camera connected to your VCR, you will need to select the AV
input you have connected the camera to on the VCR, turn your TV onto the
channel you would normally use to view a tape or movie on your VCR. This
channel may be activated by a button on your remote that is marked with this
symbol , or L1 or L2 or possibly AV1 or AV2 . Please read the instructions
for your VCR or TV for more information on using their A/V inputs.
3) Connect DIN Socket (2) on the Wireless Power Cable to the DIN plug (3)
on the back of the camera, then connect the DC Socket (4) on the Wireless
Power Cable to the DC Plug (5) on the Power Adaptor for Camera.
3) After connecting both the camera and the receiver make sure the receiver is
switched on and switched to the same channel as the camera. Press the
Channel Selector Button on the receiver until the video is shown on your
TV correctly. Obtain the best picture by adjusting the position of the Wireless
Maxi-Brite Camera and Receiver unit to suit. Try slightly different locations of
either unit for optimum results.
4) If you are mounting the camera to a ceiling, unscrew the camera stand (6)
from the camera body and carefully screw it into position on the top side of
the camera or the picture will appear on your screen upside down.
Setting Up Your System - Wireless
Setting Up Your System - Wired
DVR or MONITOR
With RCA Sockets
U
O
T
IN
O
V
E
D
I
O
V
I
D
E
I
A
U
D
O
U
A
IO
D
Receiver
Power Adaptor
CH4
Video
Wireless
Power Cable
Power
Adaptor
for Camera
Camera
Receiver
Video
Signal Cable
Power
Switch
1
2
3
4
5
6
DVR or MONITOR
With RCA Sockets
U
O
T
I
N
O
V
D
E
I
O
V
I
D
E
UDI
A
O
U
A
I
O
D
1) Connect DIN Socket (1) on the Wired Power & Video Cable to the DIN
Plug on the back of the camera,
2) Connect the BNC Socket (2) on the Wired Power & Video Cable to the
BNC Plug (3) on the Power & Video Extension Cable, then connect the
DC Socket (4) on the Wired Power & Video Cable to the DC Plug (5) on
the Power & Video Extension Cable.
4) Connect the BNC Plug (6) on the other end of Power & Video
Extension Cable to your monitoring device (TV, monitor, VCR,DVR...etc.)
If you are using a monitoring device with RCA connection (picture shown),
you will need to connect the BNC - RCA Adaptor (7) to the BNC Plug (6)
on the Power & Video Extension Cable first, then connect to your
monitoring device.
5) Connect the DC Socket (8) on the Power & Video Extension Cable to
the DC Plug (9) on the Power Adaptor for Camera.
6) If you have an A/V TV with RCA sockets you will need to switch the TV to
the AV channel to view the camera.
To view the camera connected to your VCR, you will need to select the AV
input you have connected the camera to on the VCR, turn your TV onto
the channel you would normally use to view a tape or movie on your
VCR. This channel may be activated by a button on your remote that is
marked with this symbol , or L1 or L2 or possibly AV1 or AV2. Please
read the instructions for your VCR or TV for more information on using
their A/V inputs.
1
ed
o & W
i
r P we
r
V
i o ede
C
abl
Camera
2
3
e
Po
w
r
& V
ideo
Ex
te
nsion Ca
ble
4
5
6
7
8
9
(4 Seiten)
(48 Seiten)
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Kommentare zu diesen Handbüchern